Interior LEDs

[djnapkin]

...continued

Get a small screwdriver and and push the clips holding the sockets as below. Onces that's done simply replace the bulbs and reverse procedure to reinstall.


For the Main Interior Light & Number Plate Lights, consult your manual.
Basically for the interior light, get a small screwdriver in along the edge opposite where it hinges (you will see like a little difference in the plastic where there is a clip). Lever it towards the front of the car so you can get the clip past the 'lip' and it comes straight off.

As for the number plate lights, have a look and it's self explanatory. It's like opening the battery compartment on a remote. Twist the plug anti-clockwise to get at the bulb.

It's easy peasy.

End Result:
Comparison between LED main light and regular map lights.

Number plate lights. Nice and white.

It's hard to get a pic which shows how much light is in the interior with my cam-phone. Heres my attempt. It's not quite as bright as the old bulbs. But much whiter and better looking. If you read books at night in your car you may want to think twice. You might strain your eyes after some time. But if not, go for it!